Comparison:Makita 2704N vs MLT100N

Two Makita table saws, same blade diameter, a clear family resemblance… yet not quite the same personality. The 2704N is built for job sites where you’re ripping hardwood all day long, backed by a strong motor. The MLT100N, on the other hand, plays the middle ground: lively enough for serious work, but easier to move around which matters when you’re constantly hauling your gear from place to place. Both suit skilled DIYers as well as pros, though not in the same way.

Makita 2704N

Technical specifications

Nominal power : 1650 W

No-load speed : 5200 min⁻¹

Cutting height at 90° : 93 mm

Cutting height at 45° : 64 mm

Bevel range : −0,5° to 50°

Noise level (Lwa) : 107 dB(A)

Table dimensions : 625 × 567 mm

Weight : 35 - 37 kg

Overall dimensions : 715 × 753 × 483 mm

Table extensions : Rear

Transportability : Standard

Advantages / Disadvantages

Strengths

1650 W of power, suitable for hardwood and repeated cuts.
High no-load speed (5200 min⁻¹), helpful for achieving smooth cuts.
Wide bevel range (−0.5° to 50°) for fine adjustments.
Soft start to reduce jolts at startup.
Integrated electric brake for safer blade stopping.
Solid construction designed for heavy-duty use.

Weaknesses

Higher noise level than the MLT100N.
Heavy weight, not ideal for frequent transport.
Slightly narrower table compared with its counterpart.
Limited extensions, with the left-side one available only as an option.

Indicative price

1385$

Who is Makita 2704N suitable for?

The Makita 2704N is a table saw built for sustained work, with a motor that’s stronger than average and a structure designed to stay stable during long cutting sessions. Its priorities are precision and consistency two qualities often sought in a workshop or on a fixed job site.

Makita MLT100N

Technical specifications

Nominal power : 1500 W

No-load speed : 4300 min⁻¹

Cutting height at 90° : 93 mm

Cutting height at 45° : 64 mm

Bevel range : 0° to 45°

Noise level (Lwa) : 100 dB(A)

Table dimensions : 610 × 620 mm

Weight : 34,8 - 35,1 kg

Overall dimensions : 726 × 984 × 473 mm

Table extensions : Rear + left + right

Transportability : Handle + smaller footprint

Advantages / Disadvantages

Strengths

Built-in rear, left, and right extensions to quickly expand the work surface.
Precise angle adjustment, handy for repeated cuts without constant recalibration.
Adjustable table height (310–560 mm), useful for adapting to job-site conditions.
Lower noise level than the 2704N, making long sessions a bit less tiring.
More portable format: carrying handle and smaller footprint.
Slightly lighter weight, making transport easier.

Weaknesses

Lower power output (1500 W), which slightly limits performance on hardwood.
Slower no-load speed (4300 min⁻¹), giving the cut less bite.
Narrower bevel range (0° to 45°).
Less suited for continuous heavy-duty work.

Indicative price

510$

Who is Makita MLT100N suitable for?

The Makita MLT100N is a table saw designed for mobile job sites and constantly changing setups. It still delivers enough performance for serious ripping, while focusing on more flexible ergonomics and a format that’s easier to handle.

Comparison table: Makita 2704N vs MLT100N

Criteria	2704N	MLT100N	Verdict
Nominal power	1650 W	1500 W	2704NMore powerful (+10%)
No-load speed	5200 min⁻¹	4300 min⁻¹	2704NFaster (+21%)
Cutting height at 90°	93 mm	93 mm	Tie
Cutting height at 45°	64 mm	64 mm	Tie
Bevel range	−0,5° to 50°	0° to 45°	2704NWider range
Noise level (Lwa)	107 dB(A)	100 dB(A)	MLT100NQuieter (−7 dB)
Table dimensions	625 × 567 mm	610 × 620 mm	MLT100NLarger table
Weight	35 - 37 kg	34,8 - 35,1 kg	Tie
Overall dimensions	715 × 753 × 483 mm	726 × 984 × 473 mm	2704NMore compact
Table extensions	Rear	Rear + left + right	MLT100NMore versatile
Transportability	Standard	Handle + smaller footprint	MLT100NMore portable

Recommended accessories

For Makita 2704N

Circular Saw Blade, Makblade + t.c.t., 260 x 30 mm, 48 tB-09824

Edge Rules for 2704 Table Saw

Left extension tray 350 mm

For Makita MLT100N

Parallel stop

Circular saw blade, makblade t.c.t, 260 x 30 mm, 40 tB-08981

Work support for table saw MLT100N - MAKITA WST03

Real-life test: Makita 2704N vs MLT100N

He mostly works on renovation sites and regularly cuts panels, does ripping, and handles hardwood pieces. He tested each saw for half a day straight on solid oak and 18 mm plywood.

Experience with the Makita 2704N?

With the 2704N, Laurent immediately felt the machine had no hesitation. On oak boards, the blade bites into the material without slowing, and the higher speed is obvious when you chain straight cuts one after another. He finds the saw stable, heavy enough not to budge even a millimeter when pushing a wider sheet. The soft start helped him stay in control even when moving fast, something he values during rush periods. The only thing that wore him down a bit through the afternoon was the noise: he had to keep his earmuffs on the whole time, and it “gets on your nerves,” as he puts it.

Experience with the Makita MLT100N?

Switching to the MLT100N, Laurent immediately noticed how much easier it was to handle. The carrying handle helped him set it up quickly, and the extensions made working with large plywood sheets simpler. On hardwood, he could feel it had a bit less punch than the 2704N, but for about 80% of his tasks that day, it performed just fine. The lower noise level surprised him “changes the whole mood,” he says. Angle adjustments are smooth, nothing binds, which let him work more relaxed. However, during repeated, sustained cuts, he felt a slight drop in speed as the afternoon went on nothing dramatic, but noticeable.

User reviews

Makita 2704N

4.17/5

Power & speed

92%

Precision & adjustments

90%

Comfort & ergonomics

80%

Mobility & setup

72%

★★★★★

Julien M.

I’ve been using it in the workshop for a few months now and it keeps up the pace really well. The power is there, even on dry oak. The soft start is genuinely pleasant in day-to-day use.

★★★★★

Agnès R.

Good precision and reliable adjustments. It’s a bit louder than I expected, but once it’s running, it stays stable and reassuring. Perfect for my regular woodworking jobs.

★★★★★

Loïc P.

It’s solid, delivers clean cuts, nothing to complain about in terms of performance. The weight, however, is noticeable when you need to move it. For a fixed setup, it’s spot-on.

Makita MLT100N

4.25/5

Power & speed

78%

Precision & adjustments

84%

Comfort & ergonomics

88%

Mobility & setup

90%

★★★★★

Sébastien L.

Easy to carry, and the extensions are a real plus on the job site. The power is more than enough for standard ripping. A bit slower than a higher-end model, but perfectly respectable.

★★★★★

Marion D.

The angle adjustment is simple and precise, which saved me a lot of recalibration. The lower noise level is genuinely pleasant. I use it several times a week without any issues.

★★★★★

Thomas G.

Good machine, versatile enough for my needs. The adjustable height is surprisingly useful. It’s just missing a bit of punch on certain woods, but overall it’s reliable.